PANHARD 1930-1959
   
Dyna (1957-58)
Engine
Bore & Stroke 85mm x 75mm
Displacement 850cc
Firing order 1,2
Oil pressure (hot) -


Fuel Supply
Carburetor Zenith 36WI
Ventilation 90
Choke tube 29
Main Jet 145
Pump Jet 60
Correction Jet 2-7
Pilot Jet 75
Needle Valve 1.75


Valving
Intake tappet clearance 0.004" (cold)
Exhaust tappet clearance 0.004" (cold)
Valve-timing indication Flywheel
Intake valve opens 13° - 15° BTDC at 0.027" tappet clearance


Ignition
Breaker gap 0.016"
Plug gap 0.027"
Ignition timing indication -
Ignition timing Set at 0.027" tappet clearaance fully retard TDC


Clutch
Clutch type Single Dry Plate
Clutch linings -


Brakes
Brake type Hydraulic
Brake linings -


Wheel Alignment
Toe-Out 1⁄8" to 3⁄16" (toe-out)
Camber 1° to 1° 30'
Caster angle 1° 10' to 2°