PEUGEOT 1930-1959
	203 (1958-59) Engine Bore & Stroke 75mm x 73mm Displacement 1290cc Firing order 1,3,4,2 Oil pressure (hot) 40 lb./sq. in. Fuel Supply Carburetor Solex 32 PBICC Choke 21 Main 105 Air correction 180 Starter Jet 110 Start Air Jet 5.0 Pilot air Jet 45 Valving Intake tappet clearance 0.004" (cold) Exhaust tappet clearance 0.008" (cold) Valve-timing indication - Intake valve opens TDC at 0.028"clearance Ignition Breaker gap 0.016" Plug gap 0.024" Ignition timing indication Pulley and cover Ignition timing 22° BTDC (max. advanced) Clutch Clutch type Single Dry Plate Clutch linings Ferodo 200 x 130 Brakes Brake type Lockheed Hydraulic Brake linings Ferodo F4Z Wheel Alignment Toe-In 2mm Camber 0° 10' +36' to 0° 10' -48' Caster angle 2°41'±36' King pin angle 9°48' 403 (1958) Engine Bore & Stroke 80mm x 73mm Displacement 1468cc Firing order 1,3,4,2 Oil pressure (hot) 40 lb./sq. in. Fuel Supply Carburetor Solex 32 PBICA (alt. Zenith 34WI) Choke 23 Main 120 Air correction 180 Starter Jet 105 Start Air Jet 5.5 Pilot air Jet 45 Valving Intake tappet clearance 0.004" (cold) Exhaust tappet clearance 0.008" (cold) Valve-timing indication - Intake valve opens 0° BTDC at 0.028"clearance Ignition Breaker gap 0.016" Plug gap 0.024" Ignition timing indication Datum holes in flywheel and housing Ignition timing 9° 30' BTDC (advanced) Clutch Clutch type Single Dry Plate Clutch linings Ferodo 200 x 50 Brakes Brake type Hydraulic Brake linings Ferodo Wheel Alignment Toe-In 2mm Camber 0° 10' +36' to 0° 10' -48' Caster angle 2°26'±36' King pin angle 9°48' 403 (1959) Engine Bore & Stroke 80mm x 73mm Displacement 1468cc Firing order 1,3,4,2 Oil pressure (hot) 40 lb./sq. in. Fuel Supply Carburetor Solex 32 PBICA (alt. Zenith 34WI) Choke 23 Main 120 Air correction 170 Starter Jet 105 Start Air Jet 5.5 Pilot air Jet 45 Valving Intake tappet clearance 0.004" (cold) Exhaust tappet clearance 0.008" (cold) Valve-timing indication - Intake valve opens 0° BTDC at 0.028"clearance Ignition Breaker gap 0.016" Plug gap 0.024" Ignition timing indication Datum holes in flywheel and housing Ignition timing 9° 30' BTDC (advanced) Clutch Clutch type Single Dry Plate Clutch linings Ferodo 200 x 50 Brakes Brake type Hydraulic Brake linings Ferodo Wheel Alignment Toe-In 2mm Camber 0° 10' +36' to 0° 10' -48' Caster angle 2°26'±36' King pin angle 9°48'