Holden Ute

Holden Ute
Overview
Manufacturer - Holden
Also called - Chevrolet Lumina / Pontiac G8 Sport Truck
Production - 2000-2017
Body and chassis
Body style - 2-door coupe utility
Related - Holden Commodore / Holden Crewman / Holden One Tonner / HSV Maloo
Chronology
Predecessor - Holden Commodore utility
Successor - Holden Colorado

The Holden Ute was a coupe utility built by Holden, the Australian subsidiary of General Motors, since 2000. Before then, Holden had marketed their Commodore-based utility models under the Holden Utility (VG) and Holden Commodore utility (VP, VR, VS) names, although the term “Holden Ute” was also used in their official marketing literature. The Holden Ute name is often used for earlier Holden Utility models (which were produced from 1951 to 1984) as the word "ute" is a colloquial term used commonly in Australia for a utility vehicle or pickup truck. Holden's performance division, an independent company called HSV assembles a high-performance version called the Maloo. Between 2003 and 2007, Holden built a stretched, crew cab version of the Ute with four doors and seating for five, called the Holden Crewman and between 2003 and 2005 a cab-chassis version known as the Holden One Tonner.
The Ute launched with a locally built 3.8-litre Ecotec V6 engine of Buick design. A 5.7-litre Generation III V8 engine option was also available, but this was replaced by the 6.0-litre Generation 4 in 2006, and updated to the L98 specification later on that year. In 2004, Holden replaced the venerable V6 with a 3.6-litre Alloytec unit.
The Australian-assembled Ute was to be sold in the United States as the Pontiac G8 ST starting in 2009 alongside the four-door Commodore-based G8 sedan. However, due to GM's company-wide model review, a result of the 2008 global financial crisis, such plans were shelved on 6 January 2009. Exports of the G8 sedan remain unaffected. Sales of the Ute in South Africa as the Chevrolet Lumina SS commenced during 2006/2007 and in Middle East in 2009/2010, making it the first full-size Chevrolet coupé utility ever since the 1987 discontinuation of the El Camino (even though this Lumina was never sold in the USA).

'Holden' Coupe Utility

First Generation (Holden 48-215, Holden FX)
The Holden 50-2106 was the first Holden Ute, based on the Holden 48-215.
Second Generation (Holden FE, Holden FC, Holden FB, Holden EK)
The second generation 'ute' was a revision of the 50-2106 and was based on the FE to EK Holden and retained the sedan body as a base.
Third Generation (Holden EJ, Holden EH, Holden HD, Holden HR)
The third generation Holden-based ute was slightly more refined than previous models, however still retained the full length floorpan, although gained the station wagon's wheelbase.
Fourth generation (Holden HK, Holden HG,Holden HT)
Fifth generation (Holden HQ, Holden HJ, Holden HX, Holden HZ)
The HQ-HZ was the first full body redesign of the ute and dropped the rear station wagon floor pan for a shorter, front row only style floorpan, along with introducing the Holden One Tonner cab-chassis, the HQ ute is highly desirable as it is the only 'Muscle era' Holden ute tagged to allow a 350 cubic-inch Chevrolet Small Block V8, removing the need to get an engineer to sign off on modifications. Although, as a result, these utes are highly restricted in states such as Victoria, for P-Plate drivers, although not surpassing legal power to weight limitations by a fair margin.

First generation (2000-2007)

VU
Holden introduced the Ute range with the VU, replacing the Holden VS Utility. The VU's arrival was a full 36 months after the VT Commodore sedan, meaning it arrived in time for the launch of Holden's VX Commodore series. The VU utilises the same wheelbase as the VT Commodore station wagon and WH Statesman/Caprice, meaning a wheelbase increase of 116 mm (4.6 in). The Ute employs the same interior as the Commodore, while also picking up the VX's upgraded equipment lists and re-styled exterior design.
Base: Built up from the Commodore Executive's specification. Available with 3.8-litre 152 kW (204 hp) Ecotec V6 - 4sp auto, 5sp manual or 5.7-litre 225 kW (302 hp) Generation 3 V8 - 6sp manual or 4sp auto
S: Based on Commodore 'S' specification. Available with 3.8-litre 152 kW (204 hp) Ecotec V6 - 4sp auto, 5sp manual speed
SS: Based on Commodore SS specification, minus side-impact airbags. Available with a 5.7-litre 225 kW (302 hp) Generation 3 V8 - 6sp manual or 4sp auto
The range received a minor refresh with the VX Series 2 models 12 months later, with the major upgrade being an additional 5 kW (7 hp) to Holden's Generation 3 V8's.
In October 2001 The VU Ute came out in a special edition "SS Fifty" (pictured right) to mark the 50th anniversary. This model has only 500 units produced. Every SS 50 was identical in terms of color schemes, all 500 units were released with a black exterior and a partial leather interior that contained plenty of "hyper yellow" accents. Other items that made the SS 50 different were the chrome sports bar on the back, unique black-and-yellow engine cover, a leather-wrapped steering wheel, handbrake cover and gear knob as well as a color-coded instrument cluster to match the leather bolsters on the sports seats.
The VU's were superseded by the VY range in September 2002.
VY
The Ute range received its first major facelift in the form of the 2002 VY range. VY Ute's received the same upgrades as the sedan/wagon range, which involved a new, sharper-designed nose, and more European-styled interior. The same three specification models were carried over for the VY, and picked up the same upgraded equipment lists as the VY sedans. The VY range marked major change for Holden's Ute range, with the 2003 addition of two new models: the return of the One Tonner cab-chassis utility after an 18-year hiatus; and the introduction of Holden's first-ever 4-door utility, arriving in the form of the Crewman. The Crewman brought a longer wheelbase - 3,206 mm (126.2 in) compared to the 2,939 mm (115.7 in) of the Ute; and a shorter tray - 1,463 mm (57.6 in) compared to the 2,193 mm (86.3 in) of the Ute. In December 2003, Holden released an all-wheel drive variant of the Crewman known as the Crewman Cross 8. Powered by a 225 kW (302 hp) V8 engine, the Cross 8 featured a modified appearance, more suited to an off-road vehicle.
Both the Crewman and One Tonner models added instant sales to the Holden range, sparking rapid expansion of the Holden Ute range, its first major growth spurt since its 1990 re-introduction. Once again the same three specifications were carried over for the VY, with the Ute range available in base Ute, S & SS forms. The same did not apply for the One-Tonner cab-chassis range though - it was available in just two model forms, base and S.
Base: Based on Commodore Executive specification. Available with 3.8-litre 152 kW (204 hp) Ecotec V6
S: Based on Commodore S specification. Available with 3.8-litre 152 kW (204 hp) Ecotec V6 - 4sp auto, 5sp manual
SS: Based on Commodore SS specification. 5.7-litre 235 kW (315 hp) Generation 3 V8 - 6sp manual or 4sp auto
Crewman models were on the other hand available with the same three specifications as the Ute range, and were launched conjointly with the rest of Holden's VY Series 2 range, the major update this time being the addition of 10 kW (13 hp) to the Gen.3 V8. By December 2003 the Crewman range had expanded to include Holden's very first AWD utility in the form of the Crewman Cross 8. The Cross 8 received bolstered wheelarches, raised ride height as well as additional equipment, with the sole drivetrain being the recently upgraded Gen.3 V8 connected to a 4-speed automatic. V6-powered versions of the One Tonner & Crewman were only available with automatic transmission. The VY's were superseded by the arrival of the VZ range in August 2004.
VZ
The final series of Holden's VT-generation was the VZ range, launched in August 2004. Holden's main upgrade for the VZ's was the introduction of an all-new Alloytec V6, replacing Holden's previous Ecotec V6's which had been in use since the 1995 launch of the VS Commodore. Whilst the sedan VZ range received both versions of the Alloytec V6, the ute range received just the lower-capacity Alloytec 175 - it was the standard engine across the entire ute range with a six-speed manual - an upgraded 4-speed automatic was available as an option. Once again the One Tonner & Crewman ranges shared the same specification models, as shown below:
Base: Based on Commodore Executive specification. Available with 3.6-litre 175 kW (235 hp) Alloytec V6 - 6sp manual or 4sp auto
S: Based on Commodore SV6 specification. Available with 3.6-litre 175 kW (235 hp) Alloytec V6 - 6sp manual or 4sp auto
This model was rebranded as SV6 in August 2006, and the 5-speed auto from the sedan became available for the first time as well as a power increase to 190 kW (255 hp).
SS: Based on Commodore SS specification (minus side-impact airbags on cab-chassis). Available with a 5.7-litre 235 kW (315 hp) Generation 3 V8, or the new 260 kW (349 hp) 6.0-litre Generation 4 V8 'L98' - 6sp manual or 4sp auto
Crewman's were once again available in Cross 8 form, whilst the VZ range added the Crewman Cross 6, essentially a V6 version of the Cross 8.
One-Tonners were available with the following specifications:
Base: Based on Commodore Executive specification. Available with 3.6-litre 175 kW (235 hp) Alloytec V6 - 6sp manual or 4sp auto or 5.7-litre 235 kW (315 hp) Generation 3 V8 - 6sp manual or 4sp auto
S: Based on Commodore SV6 specification minus fog-lights. Available with 3.6-litre 175 kW (235 hp) Alloytec V6 - 6sp manual or 4sp auto or 5.7-litre 235 kW (315 hp) Generation 3 V8 - 6sp manual or 4sp auto
Cross 6: AWD One-Tonner. Available with 3.6-litre 175 kW (235 hp) Alloytec V6 - 4sp automatic only
SVZ: Based on the SV6 plus leather seats, paddle shifts on the steering wheel, Monaro CV8 rims. Available with 3.6-litre 195 kW (261 hp) Alloytec V6 - 5-speed automatic or 6-speed manual
To make room in the factory for the upcoming VE Commodore, production of the One Tonner ceased in December 2005.
The Ute range continued without any updates for the next 18 months, until the January 2006 addition of Holden's new L76 V8's. Holden's new V8 range was introduced after its previous Generation 3 V8 failed to meet new Euro III emission standards introduced in Australia on January 1, 2006. The new Generation 4 V8's contained an additional 10 kW (13 hp) compared to their predecessors (the ute's had previously received an addition 15 kW (20 hp) of power, inline with the VZ Sedan range), but were missing two key features compared to their American counterparts: both Displacement on Demand and variable valve timing had been removed. The Alloytec 175 also lost 3 kW (4 hp) of power due tweaks made to meet Euro III standards. The VZ Utes remained on sale well after the introduction of Holden's next-generation VE sedans, as did the VZ Wagons. By December of the same year, the Crewman and all AWD variants of the ute were gone from showrooms after Holden ceased production, whilst the curtain was brought down on the One-Tonner range once again after poor sales results. Holden's VZ Utes were superseded by the 8th-generation VE Ute range in September 2007.

1954 Holden FJ utility
1993 Holden Commodore utility
2001-2002 Holden Ute SS (VU II)
2001-2002 Holden Ute S (VU II)
Holden Ute SS (VY II)
Holden Ute S (VY)
Holden Ute Storm S (VZ)

wikipedia.org (en)